Floor boards, floor mats

Rubber anti-fatigue mat, height 15 mm, width 0.9 m, length 0.6 m. Suitable for operations requiring long-term standing of workers, such as production areas, assembly lines, packaging workplaces and the like. Warranty 2 years.

Decontamination hygienic adhesive mat Sticky Mat is made of polyethylene film coated with acrylic, water-soluble glue. The materials used are harmless to health and do not contain silicone or ammonia. The decontamination properties of the mat allow for ideal use before entering clean rooms. When passing through the adhesive mat, the soles of the shoes will be cleaned of fine dirt and dust particles. The individual sheets of the mat are marked with a number indicating the number of sheets taken. Warranty 2 years.

Decontamination hygienic adhesive mat Sticky Mat is made of polyethylene film coated with acrylic, water-soluble glue. The materials used are harmless to health and do not contain silicone or ammonia. The decontamination properties of the mat allow for ideal use before entering clean rooms. When passing through the adhesive mat, the soles of the shoes will be cleaned of fine dirt and dust particles. The individual sheets of the mat are marked with a number indicating the number of sheets taken. Warranty 2 years.

Decontamination hygienic adhesive mat Sticky Mat is made of polyethylene film coated with acrylic, water-soluble glue. The materials used are harmless to health and do not contain silicone or ammonia. The decontamination properties of the mat allow for ideal use before entering clean rooms. When passing through the adhesive mat, the soles of the shoes will be cleaned of fine dirt and dust particles. The individual sheets of the mat are marked with a number indicating the number of sheets taken. Warranty 2 years.

The Sani-Trax black rubber disinfectant hygienic mat cleans and disinfects the soles of shoes. Thousands of flexible rubber fingers remove dirt from every crease of the sole. They bend under pressure and deposit the trapped dirt below the surface of the disinfectant solution. In this double way, it prevents the introduction of contaminants into food and other operations. The size of the mat is suitable for most entrances. Suction cups on the back of the mat prevent it from shifting. Warranty 2 years.

The Honeycomb entrance mat is suitable for removing coarse dirt such as snow and mud. Height 23 mm, width 0.8 m, length 0.6 m. Can also be used as a grass mat for grassing stressed areas. Warranty 2 years.

The Honeycomb entrance mat is suitable for removing coarse dirt such as snow and mud. Height 23 mm, width 1 m, length 0.75 m. Can also be used as a grass mat for grassing stressed areas. Warranty 2 years.

The Honeycomb entrance mat is suitable for removing coarse dirt such as snow and mud. Height 23 mm, width 1.2 m, length 0.8 m. Can also be used as a grass mat for grassing stressed areas. Warranty 2 years.

The Workmate oil-resistant industrial mat is an ideal helper for operations that require workers to stand for long periods of time and are characterized by a slippery/greasy environment. For production operations with machining stands, lathes, drills, but also for gastro operations, etc. Height 14 mm, width 0.9 m, length 0.6 m. Warranty 2 years.

Textile indoor cleaning mat, height 6 mm, width 0.8 m, length 0.6 m. Intended for cleaning shoes in normally stressed entrances to buildings and other indoor spaces. The top layer of the mat is made of 100% polypropylene, the reverse side of the mat is made of vinyl with a reinforced beveled edge to prevent tripping. Warranty 2 years.

The Honeycomb entrance mat is suitable for removing coarse dirt such as snow and mud. Height 22 mm, width 1 m, length 0.5 m. Can also be used as a grass mat for grassing stressed areas. Warranty 2 years.

The modular rubber mat with a "boiler plate" surface texture is ideal for assembling a rubber floor of any size, suitable for a sports center, but also for a garage or home workshop, production. Thanks to its surface, it has excellent anti-slip properties, absorbs shocks caused by the impact of objects or shoes and reduces noise, has an anti-fatigue effect, insulates from the cold floor. Using the connection of individual modules, you can create a rubber floor of any size. You can finish the floor by cutting off the locks - males. If necessary, the individual modules can be easily divided and relocated (watch out for modules with cut locks, they can no longer be connected, they will always be marginal modules).

Rubber approach edge - male, designed for safer access and more comfortable crossing of the Diamond Plate Tile rubber mat.

Rubber ramp edge - female, designed for safer access and more comfortable crossing of the Diamond Plate Tile rubber mat.

Depending on the surface, suitable for industry, agriculture, halls, winter stadiums, etc. Board format 800 x 600 mm, footprint 760 x 560 mm (board has locks). Excellent thermal insulation, high slip resistance of the boards, chemical stability, low flammability, easy maintenance, quick assembly and disassembly. Warranty: 2 years. For this product, even with a purchase value over CZK 5,000 excluding VAT, shipping is paid according to the place of delivery.

  MOST SELLING TYPE - Interior injection-molded floor board. Use: floors of warehouses, workshops, production halls, operations with less load, indoor exhibition areas, stables for horses and cattle, protection of lawns in football stadiums when holding concerts, trouble-free movement of forklift trucks load 3.5 tons/1 dm2. Board format 800 x 600 mm, footprint 760 x 560 (the board has locks). For this product, even with a purchase value over CZK 5,000 excluding VAT, shipping is paid according to the place of delivery.