Classic well-known stand for 5 bikes. Suitable for all types of wheels with all standard tire sizes. The supporting parts of the stand are made of steel profiles. The bike can be locked through the frame. Dimensions: width 1000 mm, height 760 mm, depth 630 mm, weight 9 kg, standing width 175 mm. Warranty: 2 years.

Hanger for 5 bikes, usable for all types of bikes and tire widths. It is especially suitable where there is a lack of space to store a bicycle. Made from a log with a diameter of 12 mm. Width 1250 mm, height 750 mm, depth 205 mm, weight 7.5 kg. Hanger capacity 100 kg.

Stand for 5 bicycles. The patented shape of the bike holders - bicycles hold the tire after being inserted into the rack, they are stable, the spokes and rims of the bicycles are not damaged. Made of tubes with Ø 18 mm and square profile 30 x 30 mm. The surface treatment of the stand by galvanic galvanization guarantees excellent protection against corrosion. Stand equipped with two holes for anchoring to the ground or to the wall.

Stand for 3 bicycles. The patented shape of the bike holders - bicycles hold the tire after being inserted into the rack, they are stable, the spokes and rims of the bicycles are not damaged. Made of tubes with Ø 18 mm and square profile 30 x 30 mm. The surface treatment of the stand by galvanic galvanization guarantees excellent protection against corrosion. Stand equipped with two holes for anchoring to the ground or to the wall.

Stand for 5 bikes in two variants - to be concreted into the ground or to be anchored. Hot-dip galvanized surface - long service life of the stand. Stand width 1250 mm, weight 14 kg, stand width 82 mm.

Bike stand usable for all types of bikes with all standard tire sizes. The supporting parts of the racks are made of steel profiles resistant even to rough handling. It is suitable for placing in a space and for a larger number of wheels - up to 10.

Bike hanger. Made of rigid steel profiles. The surface protection is done with red powder paint, it is ready to be anchored to the wall. When not in use, the hanger can be folded onto the wall to save space. The folded hanger is only 122 mm wide. Dimensions when folded (h x w x d): 520 x 530 x 530 mm.

It is made of rigid steel profiles, which guarantees an almost unlimited lifespan of the stand. It is ready to be anchored to the wall. Due to the possibility of anchoring to the wall using different materials, anchoring material such as anchors, dowels and screws are not included. Width 620 mm, weight 2.5 kg.

Stand for 1 bike. Made of rigid steel profiles, surface treatment by hot-dip galvanizing, which guarantees an almost unlimited lifespan of the stand. With several pieces, they can be combined as one-sided or double-sided as desired. Ready to anchor to the ground.

Bike stand usable for all types of bikes with all standard tire sizes. The load-bearing parts of the racks are made of steel profiles with dimensions resistant to rough handling. Thanks to the lower and higher supporting parts of the wheels, more bikes can be placed next to each other in a smaller space.

Bike stand made of rigid steel profiles. The surface protection is done by hot-dip galvanizing, which guarantees an almost unlimited lifespan of the stand. It is ready to be anchored to the wall. Due to the possibility of anchoring to the wall using different materials, anchoring material such as anchors, dowels and screws are not included.

Low stand for 2 or 3 bikes. Made of a combination of cast iron and steel - a cast iron compound connected by steel rods. Stand width (2 wheels) 490 mm, (3 wheels) 890 mm, height 410 mm, depth 630 mm, weight (2 wheels) 15 kg, (3 wheels) 22 kg.

All-cast iron round bike stand. For 2 or 3 wheels, it can be made at the customer's request for more wheels. Warranty 2 years.